Skip to main content
Open navigation menu
Free trial

For electrical contractors

Electrical software that keeps every job on its signed scope.

Lock in the scope before the crew arrives. Relay keeps the signed quote, the scheduled visit, the permit steps and the finished work together, from a single outlet to a 200 amp panel.

Start free 30-day trialSee pricing

30 days free, no card required; then $149/month. 5 users included.

Trade templateElectrical
Day one
  • Panel safety inspection1 hr
  • Panel upgrade to 200 amp10 hr
  • EV charger install (Level 2)4 hr
  • Whole-home surge protector1 hr

Panel upgrade checklist

  • Confirm the permit is pulled
  • Coordinate the power shutoff with the utility
  • Protect the work area

Electrical Safety Plan

From the Electrical template a trial adds. You change every price and step.

  • No contractMonth to month. Cancel any time.
  • Your data stays yoursOwners can export every record, any time.
  • Payments go to youCard payments land in your own Stripe account.
  • Kept separateEach business's records stay in its own account.

Built for electrical work

Where electrical days go sideways, and what Relay does about it

  1. 01

    Scope creep on every install

    The customer adds four recessed lights on site, nobody writes it down, and the invoice turns into a debate.

    In Relay

    Revise the quote and send it again. The customer signs the new version online, and Relay keeps the earlier version on record so the agreed scope is never in doubt.

    Quotes signed online
  2. 02

    EV charger calls that need a panel decision

    Half of the EV charger requests turn out to need a panel upgrade, and the customer balks at a surprise second quote.

    In Relay

    Send the EV charger options in one quote: the charger alone, with surge protection, or with a panel upgrade when the panel is full. The customer picks what fits.

    Quotes signed online
  3. 03

    Permit steps slip through the cracks

    A panel goes in, but the inspection never gets scheduled because it was on a sticky note in the truck.

    In Relay

    The panel upgrade checklist starts with confirming the permit and ends with scheduling the inspection. Required steps must be ticked before the visit can close.

    Phone checklists, photos and signatures
  4. 04

    Troubleshooting calls that never become quotes

    The electrician finds the fault, fixes the obvious part and leaves without offering the surge protector or panel work the house needs.

    In Relay

    The troubleshooting checklist ends with repair options and prices before starting. The office turns them into a quote the customer can sign from their phone.

    Phone checklists, photos and signatures
  5. 05

    Crews double-booked across jobs

    A rough-in runs long and the afternoon service call is left waiting with no warning.

    In Relay

    Move visits on the day view and Relay flags conflicts before saving. Turn on automatic visit-time-changed emails so customers hear about the new time.

    Scheduling and recurring plans

Ready on day one

Real electrical examples, already set up

Pick Electrical when you start your trial and Relay adds common electrical services, troubleshooting and panel checklists, quote options and a yearly safety plan. Change every price, step and word to match how you work.

Sample services from the Electrical template
ServiceTimeFrom
Panel safety inspectionPanels1 hr$149
Panel upgrade to 200 ampPanels10 hr$3,200
EV charger install (Level 2)EV and generators4 hr$1,150
Whole-home surge protectorPanels1 hr$395
Recessed light (per light)Lighting45 min$175
Generator inlet and interlockEV and generators4 hr$1,350

Suggested starting prices from the template, not Relay charges. You set your own before anything reaches a customer.

Job checklist

Panel upgrade checklist

  1. Confirm the permit is pulled
  2. Coordinate the power shutoff with the utility
  3. Protect the work area
  4. Install the new panel and breakers
  5. Label every circuit
  6. Restore power and test each circuit
  7. Schedule the inspection
  • Before photo of the old panelrequired
  • After photo of the new panelrequired
  • Finished panel labelrequired

Quote with options

EV charger options

Charger install alone, with surge protection, or with a panel upgrade when the panel is full.

  • Charger install

    • EV charger install (Level 2)
    • Permit and inspection fee

  • Charger and surge protection

    • EV charger install (Level 2)
    • Whole-home surge protector
    • Permit and inspection fee

  • Charger with panel upgrade

    • EV charger install (Level 2)
    • Panel upgrade to 200 amp
    • Permit and inspection fee

Repeat work

Electrical Safety Plan

A ready yearly plan with one panel and whole-home safety check and a member discount on repairs. It renews yearly, and you set the price and terms.

A day using Relay

One electrical day, start to finish

A worked example of how the office and the field use Relay together. Times are illustrative.

  1. 7:00Crews see the approved scopeEach electrician opens My day and sees stops in order, with the signed quote, address and notes on every visit.
  2. 8:00Panel upgrade, by the checklistThe crew confirms the permit, protects the work area, labels every circuit and saves photos before and after.
  3. 10:30An EV charger request books onlineA homeowner uses the booking button on your website. The request gets an owner and a response deadline.
  4. 12:00Options instead of a surpriseThe office sends EV charger options, including the panel upgrade path. The customer signs the middle option online.
  5. 2:30Troubleshooting with proofA dead circuit gets traced to a failed breaker. The photo of the failed part and the customer's signature are saved on the phone.
  6. 4:30Closeout and paymentThe approved quote becomes an invoice and the customer pays by card through your Stripe account. Payments export to QuickBooks Online.

Pricing

Priced for electrical teams, not per seat

Solo is $59/month for one user. Team is $149/month with 5 users included, then $29/month for each added user. Every feature on both, and no contract.

  • Team5 users included, then $29/month each$149per month
  • SoloFor owner-operators working alone$59per month

30 days free. No card required.

Every feature on both plans. No contract.

Start free 30-day trialCompare plans

FAQ

Electrical questions, answered

Can customers sign electrical quotes online?
Yes. Each quote has a private link where your customer can view, download, approve and sign it. Relay emails you when they answer, and revisions keep the earlier version on record.
Can I quote an EV charger with and without a panel upgrade?
Yes. The electrical template includes EV charger options: the charger alone, with surge protection, or with a panel upgrade. Customers choose one option and sign.
Does Relay help with permits and inspections?
Relay does not file permits. The panel upgrade checklist includes steps to confirm the permit is pulled and to schedule the inspection, and the template has a permit and inspection fee you can add to the quote.
Can I track panels and generators at each address?
Yes. Save equipment such as electrical panels, subpanels, generators, EV chargers and surge protectors on the customer record, so the next electrician sees what is installed.
More questions (2)
Can I see if a job made money?
Yes. Electricians track time on each job and add parts on the visit. Job profit shows what each job made after labor and parts.
How much is Relay for an electrical contractor?
Solo is $59/month for one user. Team is $149/month with 5 users included, then $29/month for each added user. Both plans have every feature, a 30-day free trial with no card, and no contract.

Keep exploring

Related trades and guides

See every trade

$149/month, 5 users included

Run your next electrical job in Relay.

30 days free, no card required; then $149/month. 5 users included, $29/month for each added user, and no contract.

Start free 30-day trialSee pricing